HP ProCurve 2520 Table 4-1.Privilege Level Hierarchy

Using the Command Line Interface (CLI)

Using the CLI

Table 4-1. Privilege Level Hierarchy

Privilege	Example of Prompt and Permitted Operations
Level
Operator Privilege
Operator Level	ProCurve>	show < command >	View status and configuration information.
		setup
		ping < argument >	Perform connectivity tests.
		link-test < argument >
		enable	Move from the Operator level to the Manager
			level.
		menu	Move from the CLI interface to the menu interface.
		logout	Exit from the CLI interface and terminate the
		exit	console session.
			Terminate the current session (same as logout).
Manager Privilege
Manager Level	ProCurve#		Perform system-level actions such as system
			control, monitoring, and diagnostic commands,
			plus any of the Operator-level commands. For a list
			of available commands, enter ? at the prompt.
Global	ProCurve(config)#		Execute configuration commands, plus all
Configuration			Operator and Manager commands. For a list of
Level			available commands, enter ? at the prompt.
Context	ProCurve(eth-5)#		Execute context-specific configuration
Configuration	ProCurve(vlan­		commands, such as a particular VLAN or switch
Level	100)#		port. This is useful for shortening the command
			strings you type, and for entering a series of

commands for the same context. For a list of available commands, enter ? at the prompt.

4-6