HP ProCurve 2520 Error Messages, Note on Using Pattern Matching with the “Show Interfaces Custom” Command, include, show int custom, show int custom, show int custom

		Port Status and Configuration
	Viewing Port Status and Configuring Port Parameters
N o t e	Each field has an fixed minimum width to be displayed. If you specify a field
	width smaller than the minimum width, the information is displayed at the
	minimum width. For example, if the minimum width for the Name field is 4
	characters and you specify Name:2, the Name field displays 4 characters.
	Parameters can be entered in any order. There is a limit of 80 characters per
	line; if you exceed this limit an error displays.
	Error Messages
	Error	Error Message
	Requesting too many fields (total characters	Total length of selected data exceeds one line
	exceeds 80)
	Field name is misspelled	Invalid input: <input>
	Mistake in specifying the port list	Module not present for port or invalid port:
		<input>
	The port list is not specified	Incomplete input: custom

Note on Using Pattern Matching with the “Show Interfaces Custom” Command

If you have included a pattern matching command to search for a field in the output of the show int custom command and the show int custom command produces an error, the error message may not be visible and the output is empty. For example, if you enter a command that produces an error (vlan is misspelled) with the pattern matching include option:

ProCurve(config)# show int custom 1-3 name vlun

include vlan1

the output may be empty. It is advisable to try the show int custom command first to ensure there is output, and then enter the command again with the pattern matching option.

10-13