HP ProCurve 2520 maxttl, traceroute, Figure C-16.Example of a Completed Traceroute Enquiry, Figure C-17.Example of Incomplete Traceroute Due to Low Maxttl Setting

Troubleshooting

Diagnostic Tools

Intermediate router hops

with the time taken for the

switch to receive

acknowledgement of each probe reaching each router.

Destination IP Address

Figure C-16. Example of a Completed Traceroute Enquiry

Continuing from the previous example (Figure C-16, above), executing traceroute with an insufficient maxttl for the actual hop count produces an output similar to this:

Traceroute does not reach destination IP address because of low maxttl setting.

The asterisk indicates there was a timeout on the second probe to the third hop.

Figure C-17. Example of Incomplete Traceroute Due to Low Maxttl Setting

C-56