HP ProCurve 2520 Locating a Device, Web: Configuring Port Monitoring, Configuration, [Monitoring Off], Monitor Selected Ports, 2.Click on [Monitor Port]

Monitoring and Analyzing Switch Operation

Locating a Device

Web: Configuring Port Monitoring

To enable port monitoring:

1.Click on the Configuration tab.

2.Click on [Monitor Port].

3.To monitor one or more ports.

a.Click on the radio button for Monitor Selected Ports.

b.Select the port(s) to monitor.

4.Click on [Apply Changes].

To remove port monitoring:

1.Click on the [Monitoring Off] radio button.

2.Click on [Apply Changes].

For web-based Help on how to use the web browser interface screen, click on the [?] button provided on the web browser screen.

Locating a Device

If you are trying to locate a particular switch you can enter the chassislocate command. The blue Locator LED will light up on that switch.

Syntax: chassislocate [ blink on off ]

Locate a device by using the blue Locate LED on the front panel.

blink <1-1440>

Blinks the chassis Locate LED for a selected number of minutes (default is 30 minutes).

on <1-1440>

Turns the chassis Locate LED on for a selected number of minutes (default is 30 minutes).

off

Turns the chassis Locate LED off.

B-28