Chapter 2

Print and view a list of speed-dial entries

You can print or view a list of all of the speed-dial entries that have been set up. Each entry in the list contains the following information:

Speed-dial number (the first ten entries correspond to the ten speed-dial buttons on the control panel)

Name associated with the fax number or group of fax numbers

For the fax speed-dial list, the fax number (or all of the fax numbers for a group)

Select print media

The HP Fax is designed to work well with most types of office media. It is best to test a variety of print media types before buying large quantities. Use HP media for optimum print quality. Visit the HP Web site at www.hp.com for more information about HP media.

Tips for selecting and using print media

For the best results, observe the following guidelines.

Always use media that conforms to the HP Fax specifications. For more information, see Understand specifications for supported media.

Load only one type of media at a time into a tray.

Load media print-side down and aligned against the right and back edges of the tray. For more information, see Load full-size paper.

Do not overload the tray. For more information, see Understand specifications for supported media.

To prevent jams, poor print quality, and other printing problems, avoid the following media:

Multipart forms

Media that is damaged, curled, or wrinkled

Media with cutouts or perforations

Media that is heavily textured, embossed, or does not accept ink well

Media that is too lightweight or stretches easily

Photo media

Use the Best mode to copy images/embedded pictures. Note that in this mode, copying takes longer.

Remove each sheet as it copies and set it aside to dry. Allowing wet media to stack up may cause smearing.

Transparencies

Insert transparencies with the rough side down and the adhesive strip pointing towards the back of the device.

Use the Normal mode to copy transparencies. This mode provides longer drying time and ensures that the ink dries completely before the next page is delivered to the output tray.

Remove each sheet as it copies and set it aside to dry. Allowing wet media to stack up may cause smearing.

20 Use the HP Fax