Send a fax in Error Correction Mode

Error Correction Mode (ECM) prevents loss of data due to poor phone lines by detecting errors that occur during transmission and automatically requesting retransmission of the erroneous portion. Phone charges are unaffected, or might even be reduced, on good phone lines. On poor phone lines, ECM increases sending time and phone charges, but sends the data much more reliably. The default setting is On. Turn ECM off only if it increases phone charges substantially, and you can accept poorer quality in exchange for reduced charges.

Before turning the ECM setting off, consider the following. If you turn ECM off

The quality and transmission speed of faxes you send and receive are affected.

The Fax Speed is automatically set to Medium.

You will no longer be able to send or receive faxes in color.

To change the ECM setting from the control panel

1.Press Setup.

2.Select Advanced Fax Setup and then select Error Correction Mode.

3.Press to select On or Off.

4.Press OK.

Receive a fax

You can receive faxes automatically or manually. Press the Answer Mode button to select the desired mode. If you select Tel mode, you must receive faxes manually. If you select FaxTel mode, the HP Fax automatically answers incoming calls and receives faxes after the number of rings that are specified by the Rings to Answer setting. If you select Fax or AnswerMachine modes, the HP Fax will answer the telephone, automatically detect fax tones, and receive a fax. You must have an answering machine connected directly to the port labeled 2-EXT on the back of your HP Fax for AnswerMachine mode.

If you receive a legal-size fax and the HP Fax is not currently set to use legal-size paper, the HP Fax reduces the fax so that it fits on the paper that is loaded. If you have disabled the Automatic Reduction feature, the HP Fax prints the fax on two pages.

Receive a fax manually

Set up backup fax reception

Reprint received faxes from memory

Poll to receive a fax

Forward faxes to another number

Set the paper size for received faxes

Set automatic reduction for incoming faxes

Block junk fax numbers

Receive a fax manually

When you are on the phone, the person you are speaking with can send you a fax while you are still connected. This is referred to as manual faxing. Use the instructions in this section to receive a manual fax.

Receive a fax

29