HP 400 manual Duplex-reverse drive assembly, Remove the duplex-reverse drive assembly

Duplex-reverse drive assembly

Before proceeding, remove the following components:

●Right cover. See Right cover on page 23.

●Scanner assembly. See Scanner assembly on page 26.

●Simplex product

◦Rear door. See Rear door (simplex product) on page 33.

◦Rear cover. See Rear cover and feed guide (simplex product) on page 37.

●Duplex product

◦Rear-upper cover. See Rear-upper cover (duplex product) on page 30.

◦Rear door. See Rear door (duplex product) on page 35.

◦Rear-lower cover. See Rear-lower cover and rear-door links (duplex product) on page 41.

●Upper-cover assembly. See Upper-cover assembly on page 51.

Remove the duplex-reverse drive assembly

1.Disconnect two connectors (callout 1), and then pass the connectors under the rear-door rib assembly.

Figure 1-133Remove the duplex-reverse drive assembly (1 of 4)

1

ENWW Removal and replacement procedures 97