2.Use a precision point screwdriver to push the left-side door pin out of the link.

NOTE: A precision point screwdriver is required to release the front door pins. The width of the blade must be 2 mm (0.08 in) or less to be able to push the door pins out of the mounting holes.

Figure 1-77Remove the front-door assembly (2 of 10)

3.Use a precision point screwdriver to push the right-side door pin out of the link.

NOTE: A precision point screwdriver is required to release the front door pins. The width of the blade must be 2 mm (0.08 in) or less to be able to push the door pins out of the mounting holes.

Figure 1-78Remove the front-door assembly (3 of 10)

ENWW

Removal and replacement procedures 59

Page 85
Image 85
HP 400 manual 78Remove the front-door assembly 3