11.To remove the Display from the Top Case, the display cable and two grounding cables must be guided through the holes in the Top Case.

Replacement Procedure

1.Guide the display posts, display cable and two grounding cables on the Display through the holes in the Top Case.

2.Replace the grounding eyelets over the display posts (see Figure 16). Use caution when replacing the grounding eyelets, as they can be broken off easily. If this happens, the assembly must be replaced.

3.Press the Display and Top Case firmly at each display post to snap the assembly in place.

4.Position the Top Case and Display Assembly over the Bottom Case and insert the two keyboard flex cables into the zero-force insertion connectors. Ensure the connectors are fully closed. Once the keyboard flex cables are secured in the connectors, do not allow them to be pulled out. This will damage the cables.

59