Logic PCA Board
(HP Authorized Service Providers Only)
Required Equipment
∙Appropriate ESD station
∙Torx #6 screwdriver
∙Two small flat tip screwdrivers (or similar prying devices)
∙Probe
Removal Procedure
1.Follow the Display Removal Procedure to separate the Display and Top Case Assembly from the Bottom Case.
2.Remove the Eject Arms (both right and left) and Mouse Button Latch and Spring (see below illustration). Note, the Mouse Latch Spring is very small and can be misplaced easily.
Eject Arm
Screw
M2x4.6mm(T6)
(Qty 5)Mouse
Button
Latch
Eject Arm Left
Mouse
Logic PCALatch
Spring
Paw Carrier
Flex Cable Slot
Eject Arm
Spring
Eject Button A
Eject Button B
Eject Arm
Spring
Figure 23 - Logic Board PCA Removal
63