0352h

 

kbd not connected

 

0353h

 

no response from kbd test

 

0354h

 

kbd test failed

 

error codes 0304, 0313-0314, 0321-0323, 0331-033C were

 

previously used

 

AUX Self Test Errors

 

 

03E0h

 

send enable-aux cmd to 8042 cmd

 

 

 

byte failed

 

03E1h

 

8042 failed to accept write-aux-

 

 

 

device cmd

 

03E2h

 

write-aux-device cmd not sent by

 

 

 

8042

 

03E3h

 

reset-aux cmd not accepted by 8042

 

03E4h

 

8042 failed to send aux-interface-test

 

03E5h

 

no reply for aux-interface-test cmd

 

 

 

from 8042

 

03E6h

 

aux device clock line stuck low

 

03E7h

 

aux device clock line stuck high

 

03E8h

 

aux device data line stuck low

 

03E9h

 

aux device data line stuck high

 

03EAh

 

no reply for aux-reset cmd from aux

 

03EBh

 

aux failed to perform reset

 

03ECh

 

send default cmd to 8042 cmd byte

 

 

 

failed

Protected-Mode Switch

 

 

0401h

 

failed to switch to protected mode

Error

 

 

 

 

error code 0500 was previously used

Serial and Parallel Test

 

 

0503h

 

no serial port

Errors

 

 

 

 

0505h

 

bad serial port

 

0543h

 

no parallel port

Keyboard Device

 

 

0600h

 

kbd has keys stuck

Errors

 

 

06XXh where XX = the scan code of

 

 

 

the stuck key

System Speed Test

 

 

0702h

 

timer failed to interrupt

Errors

 

 

 

 

0703h

 

CPU clock too slow in SLOW speed

 

0704h

 

CPU clock too fast in SLOW speed

 

0707h

 

CPU clock too slow in FAST speed

 

0708h

 

CPU clock too fast in FAST speed

 

error codes 0700-0701, 0705-0706, 0709-070C were

 

previously used

 

Timer Chip Errors

 

 

1100h

 

failed timer test

 

 

 

110Xh where X = failed timer #

 

1200h

 

no refresh tick

 

1201h

 

refresh signal stuck low

EISA Init Errors

 

 

13XY

 

X = slot number where error occurred

71