For example, in ALG mode, the keystroke sequence to calculate, say, tanh(2.5), is the following:

„´4@@OK@@ 5@@OK@@ 2.5`

In the RPN mode, the keystrokes to perform this calculation are the following:

2.5`„´4@@OK@@ 5@@OK@@

The operations shown above assume that you are using the default setting for system flag 117 (CHOOSE boxes). If you have changed the setting of this flag (see Chapter 2) to SOFT menu, the MTH menu will show as follows (left-hand side in ALG mode, right –hand side in RPN mode):

Pressing Lshows the remaining options:

Thus, to select, for example, the hyperbolic functions menu, with this menu format press @@HYP@) , to produce:

Page 3-7

Page 59
Image 59
HP 49g manual