NOTE: This setting cannot be changed for the rx2660, rx3600, and rx6600 PCI-X servers, therefore, this menu option is not available.

5.Select Configure Storage Adapters and press Enter. A submenu displays the list of adapters on the system, as shown in Figure 3-6.

Figure 3-6 Configure Storage Adapters Option

NOTE: Prior to launching the Smart Setup wizard, you must use the Configure Storage Adapters option to ensure that Linux is installed with the desired storage configuration. Only storage that is going to be used as a boot device must be configured at this time. Other (non-boot) storage can be configured using the HP Smart Setup EBSU utility or after OS installation.

6.Select the appropriate storage adapter and press Enter.

7.A list is provided with device IDs that are applicable to your adapter as generated by the EFI command drvcfg, as shown in Figure 3-7. Each device represents an adapter or a channel on an adapter. Select the appropriate adapter from the list and select Configure.

Figure 3-7 Configuring Storage Adapters

8.Review the storage adapter documentation and provide any additional information. For more information regarding the use of the storage configuration utility, see the documentation specific to the storage adapter.

9.After the desired storage adapters are configured, press ESC to return to the Main Menu.

26 Installing the OS and Updating the Server