HP 8000 s manual Loading media into trays 2 some printer models only

Loading media into trays 2 (some printer models only) and 3

Note

Before loading media into trays 2 and 3, verify that the spacers were removed from both trays when “Step 2: Unpacking the Printer” was performed.

1Firmly grip the handle in the center of the tray, squeeze the release lever, and pull the tray out until it stops.

Depending on your country, input trays arrive adjusted for either A4- or letter- sized media. To load A4- or letter-sized media, proceed to step 8; otherwise, continue with step 2.

2Turn the media-guide lock to the unlocked position.

3Slide the front media guide to the size that matches the media size you are loading.

4Turn the media-guide lock to the locked position.

26 EN