4From the list of printer names along the right side of Chooser, select the name of the printer (even if it is the only one that appears).
5Click Setup.
6Click Select PPD.
7From the list of PPD files, click HP Color LaserJet 8550 Printer.
8Click Select.
9Click Configure.
10Enter the appropriate selections for the printers installed options and click OK.
11Click OK to complete the setup. An icon appears next to the name of the printer.
12Close Chooser.
Configuring the Printer on the Network
Configure the printer in one of two ways:
zPrint directly to the printer through EtherTalk.
zPrint through the network by printing to a print queue. Set up the print queue using the network software.
The HP LaserJet Utility allows printer settings such as printer name and preferred zone to be configured from the Macintosh system. HP recommends that only system administrators use the printer configuration capabilities of this utility.
If the printer is to be serviced by a print spooler, set up the printers name and zone before configuring the spooler to capture the printer.
52 | EN |
