HP 8000 s manual Windows Network Installation, Run

Step 11: Windows Network Installation

In Microsoft Windows 9x, Windows NT® 4.0, and Windows 2000, the installation software detects both the version of Windows that is in use and the language that is selected in the operating system. The installation software then installs printer drivers and printing software that are appropriate for the system.

For Novell NetWare networks, install the software on the workstation. For Windows NT and Windows 2000 networks with a client server, install the software on the server. For Windows 9x peer-to-peer networks, install the software on all workstations that need access to the printer.

The installation software does not support shared Windows 3.1 environments.

To install the Windows printer software for system administrators

1Depending on the environment, log onto the workstation or log onto the server with Supervisor or Administrator privileges.

2Quit all applications, virus checkers, and TSR (terminate stay resident) programs. These programs can be turned back on after the installation.

3Insert the CD-ROM into the CD-ROM drive. The installer should automatically run; go to step 8. If the installer does not automatically run, continue to step 4.

4In Windows 3.1, choose Run from the File menu. - Or -

In Windows 9x, NT 4.0, or Windows 2000, click Start, then click

Run.

5Type D:\Setup.exe on the command line. (This assumes that the CD-ROM drive is the D drive.)

6Click OK.

EN Step 11: Windows Network Installation 41