Connecting Network Clients to the Printer

If you are not using a print spooler or a print queue, follow the directions below to connect the printer drivers to the printer automatically. If you are using a print spooler or if the automatic setup is unsuccessful, follow the directions below to configure the printer driver manually.

To connect to the printer automatically

1From the Apple menu, select Chooser.

2From the list of icons along the left side of Chooser, click HP LaserJet.

3In the AppleTalk Zones box, click the zone where the printer is located (if applicable).

4From the list of printer names along the right side of Chooser, select the name of the printer (even if it is the only one that appears).

Note

You might have to print a configuration page to determine the printers

 

AppleTalk name.

 

 

5Click Setup. A status dialog box appears while the printer driver attempts to communicate with the printer.

6If the setup is successful, you will be returned to Chooser and an

icon appears next to the selected printer. Close Chooser. - Or -

If setup was not successful, go to the procedure below.

To configure the printer driver manually

1From the Apple menu, select Chooser.

2From the list of icons along the left side of Chooser, click HP LaserJet.

3In the AppleTalk Zones box, click the zone where the printer is located (if applicable).

EN

Step 13: Macintosh Network Installation 51

Page 55
Image 55
HP 8000 s To connect to the printer automatically, To configure the printer driver manually