Installing the HP AdvanceStack Internet Router

Connecting to the Network

2.Use a straight-through RJ-45-to-RJ45 cable to connect the ISDN BRI port (RJ-45) to an NT1 device.

Figure 2-2. Connecting the ISDN BRI Port to an NT1 Device

Connecting the Console Terminal and Modem

Use a console terminal for local administrative access to the router. You can connect only a terminal to the console port. Use the auxiliary port with a terminal or a modem for remote access to the router.

Connecting to the Console Port

Take the following steps to connect a terminal (an ASCII terminal or a PC running terminal emulation software) to the console port on the router.

1.Use an RJ-45 roll-over cable and an RJ-45-to-DB-25 or RJ-45-to-DB-9 adapter to connect a console terminal to the console port. The adapters provided by HP are labeled “Terminal”.

Additional information on roll-over cable pinouts is provided in the appendix A “Cable Specifications”.

Installation

2-11