HP AdvanceStack Internet Router manual Installing the Module, Circuitry on the boards

Installation

Installing the HP AdvanceStack Internet Router

Installing the Module

	Installing the Module
	The HP AdvanceStack Internet Router module can be installed in any HP
	AdvanceStack host device such as hubs or switches with an Expansion Slot.
	Expansion Slot is the official name for the slot in an HP AdvanceStack host
	device which can take an add-on module such as this router module.
N O T E	Static electricity can severely damage sensitive electronic components on the
	router module. While handling the router module and installing it in the host
	device, follow these procedures to avoid damage from static electricity:
	■ Handle the module by its faceplate, and avoid touching the components
	and circuitry on the boards.
	■ Equalize any static charge difference between your body and the host
	device either by wearing a grounded wrist strap and attaching it to the
	host device chassis, or by frequently touching the host device chassis
	while you are installing the module.

To install the module into the host device, follow these steps:

1.Turn off the power. Remove the Expansion Slot Cover Plate.

2-8