Caution: Wireless Models
Be careful when removing and attaching antenna cables. Damage to cables or connectors can degrade performance.
3.Wireless models only: Remove the
4.Remove the four screws that attach the motherboard to the bottom case.
5.From the back of the notebook, remove the six standoffs (two each from the external monitor port, serial port, and parallel port).
6.Remove the antenna cable from the metal holder on the motherboard.
7.Carefully lift the motherboard out of the bottom case.
8.If present, remove the modem port cover.
Standoff, 5mm (6)
Screw,
M2.5×4mm (4)
Figure 2-18. Removing the Motherboard
HP Omnibook XE4100/XE4500 |
