Changing Your Computer Hardware Configuration

Removable Media Devices

7.Plug the audio, ATAPI and power cables into their appropriate connectors. Note that the connectors are keyed for proper insertion. See Figure 5-15.To help with plugging in the audio connector, you can pull its cable through the back of the CD drive chassis to the front of the CD drive chassis and connect it. Note that you should connect the audio cable first.

Figure 5-15 Plugging in the Audio, ATAPI and Power Cables

Audio

Cable

Ferrite Bead

ATAPI Cable

Power Cable

8.Tighten the two CD drive bracket screws as shown in Figure 5-16.The screws should be tightened using 6 inch-pounds of torque.

Figure 5-16 Tightening the Bracket Screws

Bracket

Screw (hidden)

Bracket Screw

118

Chapter 5