Changing Your Computer Hardware Configuration
Hard Disk Drives
3.Remove the four T-15 Torx shoulder screws from the hard disk drive and bracket. See Figure 5-42.You should be careful when removing the hard disk drive from its mounting bracket to avoid damaging it. Note that in order to remove the T-15 Torx screws from the sides of the hard disk drive you will have to have a T-15 Torx driver that is long enough to fit through the access holes on the sides of the hard disk drive bracket.
Figure 5-42 Removing the Hard Disk Drive from Its Bracket
Mounting
Grommet
(do not remove)
T-15 Torx
Should Screw
Hard Disk
Drive Mounting
Screw Access
Hole
Hard Disk Drive
Bracket
Plastic Release
Hook
Plastic Release
Lever
Hard Disk
Drive