Changing Your Computer Hardware Configuration

Removable Media Devices

2.Remove the CD drive bay’s rear cover by unscrewing the T-15 Torx/slotted screw as shown in Figure 5-18.Note that the CD drive bay’s rear cover is located on the back of the removable media chassis inside the system unit. Push the cover handle away from the back of the removable media chassis approximately one inch. Next pull the cover handle toward you. The audio, ATAPI and power cables are now accessible to you. Disconnect these cables from the CD drive.

Figure 5-18 Removing the CD Drive Bay’s Rear Cover

Rear

Rear Cover

Cover

Handle

Audio

Cable

T-15

Torx/Slotted

Screw

Ferrite Bead

ATAPI Cable

Power Cable

Chapter 5

121