Changing Your Computer Hardware Configuration

Removable Media Devices

2.Remove the floppy disk drive bay’s rear cover by unscrewing the T-15 Torx screw as shown in Figure 5-24.Note that the floppy disk drive bay’s rear cover is located on the rear of the removable media chassis inside the system unit. Push the cover handle away from the rear of the removable media chassis approximately one inch. Next pull the cover handle toward you. The floppy data cable and power cable are now accessible to you.

Figure 5-24 Removing the Floppy Disk Drive Bay’s Rear Cover

Rear Cover Handle

Power

T-15

Torx/Slotted

Cable

Screw

 

Rear Cover

Data Cable

Chapter 5

127