Changing Your Computer Hardware Configuration
Changing Your Monitor Type
Troubleshooting Monitor Problems
In the event that your console stops displaying to your graphics device, use the following procedure to set the console for displaying to an external terminal.
Here are the steps to follow:
1.Turn system power off.
2.Disconnect the computer keyboard connector from the system rear panel.
3.Connect a serial terminal emulator to the Serial 1 connector (the left serial connector) on the system rear panel.
4.Power on the system. The system will now display the console to the terminal connected to Serial 1 port. Note that you can use a
5.Set the monitor type and path using the Boot Console Interface. For information on doing this see the chapter “The Boot Console Interface” in this document.
Chapter 5 | 163 |