HP C6734A, g85 C6737A, g55 C6736A, G Load the input tray with letter-, legal-, or A4-size paper

AvMac.book Page 14 Friday, June 23, 2000 10:34 AM

HP OfficeJet G Series

Load the input tray with letter-, legal-, or A4-size paper

For best results, adjust the paper settings each time you change paper types. For more information, see “Set the paper type.”

1Pull out the bottom (input) tray, and slide the paper-width and -length adjusters to their outermost positions.

2Tap the stack on a flat surface to even the edges of the paper, and then check the paper for the following:

•Make sure it is free of rips, dust, wrinkles, and curled or bent edges.

•Make sure all the paper in the stack is the same size and type, unless you are working with photo paper.

3Insert paper into the input tray, print-side down and letterhead or top of page first, until it stops.

4Slide the paper-width and -length adjusters in until they stop at the edges of the paper, and be sure that the paper stack lies flat in the input tray and fits under the tab of the paper-length adjuster.

14 Chapter 5—Load paper or transparency film, or load originals