HP g55 C6736A, C6734A, g85 C6737A, C6735A, g85XI C6739A, G manual Avoid paper jams

AvMac.book Page 22 Friday, June 23, 2000 10:34 AM

HP OfficeJet G Series

To use the ADF

1Lift the lid, and make sure that the glass is clean.

For more information, see “Clean the glass” in the OnScreen Guide.

2Close the lid.

3Place all originals in the legal-size tray with the printed side facing toward the back and with the top of the document pointing down.

4Align the paper with the left side of the legal-size tray.

Insert legal-size or mix of legal- and letter-size originals vertically.

When working with originals that were originally loaded in the ADF in vertical orientation, you may notice during processing that part of the original temporarily sticks out from under the lid and a short delay occurs. This is normal behavior.

Avoid paper jams

To avoid paper jams, remove papers from the output tray frequently. Output tray capacity is affected by the type of paper and the amount of ink you are using. For more information about output-tray capacity, see “Technical information.” For help with clearing a paper jam, see the Troubleshooting Help available through the Director.

22 Chapter 5—Load paper or transparency film, or load originals