Advanced tasks (administrator only)

The “Authentication and Credentials” page and the “Advanced Settings” page of Credential Manager are available only to those users with administrator rights. From these pages, you can perform the following tasks:

Specifying how users and administrators log on

Configuring custom authentication requirements

Configuring credential properties

Configuring Credential Manager settings

Specifying how users and administrators log on

On the “Authentication and Credentials” page, you can specify which type or combination of credentials are required of either users or administrators.

To specify how users or administrators log on:

1.Select Start > All Programs > HP ProtectTools Security Manager.

2.In the left pane, click Credential Manager, and then click Authentication and Credentials.

3.In the right pane, click the Authentication tab.

4.Click the category (Users or Administrators) from the category list.

5.Click the type or combination of authentication methods from the list.

6.Click Apply, and then click OK.

ENWW

Advanced tasks (administrator only) 23

Page 29
Image 29
HP dc73 Blade Client manual Advanced tasks administrator only, Specifying how users and administrators log on