connect the audio
See “a” on the diagram on page 78.
1Connect one end of the audio cable to the de100c’s analog OUT jacks, matching red to red, white to white.
2Connect the other end to one set of your receiver’s audio IN jacks, matching red to red, white to white.
Your receiver has several sets of input jacks. Connect the de100c to the CD input jacks or an AUX set of jacks.
Be sure to set the receiver’s audio input to the corresponding mode when you use your de100c, as shown here:
CD
TAPE
TUNER 
AUX1
AUX2 
back of receiver 
| TUNER |
TAPE | AUX1 |
CD | AUX2 |
front of receiver
installing and setting up
note Digital audio capability is available through the de100c’s OPTICAL and COAX ports. To use them, purchase the appropriate cables separately.
hp digital entertainment center owner’s guide | 79 |
