Removal and replacement procedures

Remove the system board:

1. Disconnect the following cables from the system board: a. Audio/infrared board cable 1

The audio/infrared board cable connects to a LIF connector on the system board.

b.Subwoofer cable 2 (select models only)

c.USB board cable 3

The USB board cable connects to a LIF connector on the system board.

d. Power connector cable 4

2. Remove the three Phillips PM2.5×5.0 screws that secure the system board to the base enclosure.

Maintenance and Service Guide

4–41

Page 84
Image 84
HP dv7-6b56nr A1T84UAR#ABA manual Subwoofer cable 2 select models only USB board cable