HP dv7-6b56nr A1T84UAR#ABA manual Removal and replacement procedures

Removal and replacement procedures

3.Turn the computer display-side up, with the front toward you.

4.Open the computer as far as possible.

5.Lift the rear edge 1 of the switch cover until it detaches from the computer.

6.Slide the switch cover 2 back far enough to access the keyboard screws.

7.Remove the four Phillips PM2.0×3.0 screws 1 that secure the keyboard to the computer.

8.Lift the rear edge 2 of the keyboard and slide the keyboard 3 back at an angle until the keyboard connector on the system board is accessible.

Maintenance and Service Guide 4–23