Hardware Upgrades
Removing the Computer Access Panel
CAUTION: CAUTION: Before removing the computer access panel, ensure that the computer is turned off and that the power cord is disconnected from the electrical outlet.
To remove the computer access panel:
1.Turn off the computer properly through the operating system and turn off any external devices.
2.Disconnect the power cord from the power outlet and the computer, and disconnect any external devices.
3.Remove the screw 1 that secures the access panel to the computer chassis.
4.Slide the access panel back 2 about 2.5 cm (1 inch), then lift it off the unit.
To replace the access panel, reverse the removal steps.
Removing the Computer Access Panel
Photos depicted may vary as per actual machine
Hardware Reference Guide | www.hp.com/in |
