Computer Setup (F10) Utility
Computer Setup (Continued)
Heading | Option | Description |
|
Advanced BIOS | Quick Power On Self Test | Disables/enables the system to skip | |
Features |
| certain tests while booting. | |
|
| Enabling this feature decreases the time | |
|
| required to boot the system. | |
| Hard Disk Boot Priority | Allows you to specify the order of hard | |
|
| drive devices. The first drive in the | |
|
| order has priority in boot sequence and | |
|
| is recognized as drive C | |
|
| (if any device attached). | |
Advanced Chipset Features
CDROM Boot Priority | Allows you to change the ODD order |
First Boot Device | Allows you to specify which devices will |
Second Boot Device | boot first, second, and third, or to |
Third Boot Device | disable |
Boot Other Device | Disables/enables boot other device. |
APIC Mode | Disables/enables the APIC mode. |
Security Option | Setup |
| System |
F7 (Diagnostic) Support | Allows to Enable / Disable the BIOS |
| diagnostic tool |
F11 Prompt | Allows to Enable/disable the ability to |
| F11 support ( Recovery option). |
PEG/onchip VGA controller This allows you to set the first initiation the monitor display:
•Onchip VGA
•PEG Port
•Auto(default)
Allow you to ser | ||
| size to | |
Buffer Size | • | 1MB |
| • | 8MB |
DVMT Mode | Allows you to set DVMT Mode to: | |
| • | Fixed |
| • | DVMT |
Support for specific Computer Setup options may vary depending on the hardware
configuration
Computer Setup (F10) Utility Guide | www.hp.com/in |