HP E42 manual Equipment Supplied, Accessories Available

Model 5328A

General Information

1 - 8 . APPLICATIONS

1-9. Specific applications information is provided in Section III of this manual. The general application features of the 5328A are described in the following paragraphs.

1-10. The high sensitivity, frequency range, and signal conditioning controls (see Table 7-3)make the 5328A suited for a wide range of applications.

1-11. The rear panel controlled “ARM” feature of the 5328A is useful in applications such as burst frequency measurements, and pulse ampltiude measurements.

1-12. The 5328A single-shot resolution of 100 ns meets the requirements for applications such as mechanical and electromechanical device (relays) timing, time of flight measurements (ballistics), sonar ranging, radio ranging, and navigation.

1-13. Using time interval averaging, time intervals as short as 100 picosecond, with resolution to 10 picosecond may be measured. Applications include coaxial cable length measurements, phase measurements, logic timing measurements, and integrated circuit propagation delay measurement.

1-14. Full bandwidth, sensitivity, and signal conditioning of the Channel A, B, and C input amplifiers is provided for ratio and totalizing measurements.

1-15. The 5328A HP-IB Interface is able to output measurement data and be controlled (fully programmed) via the Hewlett-Packard Interface Bus (HP-16). The 5328A may be interfaced to HP-IB compatible instruments, calculators, or computers by interconnecting with an HP-IB cable.

1-16.EQUIPMENT SUPPLIED AND ACCESSORIES AVAILABLE

1-17. Table 7-7lists equipment supplied with the 5328A and Table 7-2lists accessories avail- able, The Service Kits listed in Table 1-2are described in Section III.

Table 1-1.Equipment Supplied

DESCRIPTION	HP PART NUMBER
Detachable Power Cord 231 cm (71/2 ft.) long	8120-1348
Extender Board, 18 pin	05328-62016
Table 1-2.Accessories Available
DESCRIPTION	HP PART NUMBER
HP Interface Bus Interconnect Cable	10631A, 914 mm (3 ft. long)
	10631B, 1828 mm (6 ft. long)
	10631C, 3656 mm (12 ft. long)
	10631D, 0.5 m (11/2 ft. long)
Front Handle Kit	5061-0088
Rack Flange Kit (for instruments without handles)	5061-0076
Rack and Handle Kit (installation instructions included	5061-0082
with above kits)
Service Kit:
Function Selector and ROM Kit	05328-82004

1 - 18 . SPECIFICATIONS

1-19.Table 1-3lists detailed specifications for the 5328AF/096.

1-2