HP E42 manual Tool and Test Equipment Requirements Sec Ill, Remarks Sec

time required to perform the specific tasks iden- tified for the maintenance functions authorized in the maintenance allocation chart. Subcolumns of column 4 are as follows:

C – Operator/Crew

O – Organizational

F – Direct Support

H – General Support D – Depot

e. Column 5, Tools and Equipment. Column 5 specifies by code, those common tool sets (not in- dividual tools) and special tools, test and support equipment required to perform the designated func- tion.

f. Column 6, Remarks. Column 6 contains an alphabetic code which leads to the remark in Section IV, Remarks, which is pertinent to the item oposite the particular code.

D-4. Tool and Test Equipment Requirements (Sec Ill)

a. Tool or Test Equipment Reference Code. The numbers in this column coincide with the numbers

used in the tools and equipment column of the MAC. The numbers indicate the applicable tool or test equipment for the maintenance functions.

b. Maintenance Category. The codes in this column indicate the maintenance category allocated the tool or test equipment.

c. Nomenclature. This column lists the noun name and nomenclature of the tools and test equipment required to perform the maintenance functions.

d. National/NATO Stock Number. This column lists the National/NATO stock number of the specific tool or test equipment.

e. Tool Number. This column lists the manufac- turer’s part number of the tool followed by the Federal Supply Code for manufacturers (5-digit) in parentheses.

D-5. Remarks (Sec IV)

a.Reference Code. This code refers to the ap- propriate item in section II, column 6.

b.Remarks. This column provides the required explanatory information necessary to clarify items appearing in section II.

D-2