Chapter 8

features copy the Use

4.Press the Start Copy Black or Start Copy Color button to increase the number of copies up to a maximum of 9 (varies by model).

NOTE: The HP All-in-One waits very briefly for another button press. Pause for a while before pressing the Start Copy Black or Start Copy Color button again to start the copy job.

TIP: Use the software that you installed with the HP All-in-One to set the number

of copies higher than 9.

5.Press Start Copy Black or Start Copy Color.

In this example, the HP All-in-One makes six copies of the original 10 x 15 cm (4 x 6 inch) photo.

Related topics

Control panel buttons

Copy a two-page black-and-white document

You can use the HP All-in-One to copy a single- or multiple-page document in color or black and white. In this example, the HP All-in-One is used to copy a two-page black- and-white original.

To copy a two-page document from the control panel

1.Make sure you have paper loaded in the input tray.

2.Place your original with the side you want to copy or scan face down on the left front corner of the glass.

3.Press the Paper Type button to set the paper type.

4.Press Start Copy Black.

5.Remove the first page from the glass and load the second page.

6.Press Start Copy Black.

Related topics

Control panel buttons

52 Use the copy features