LAN Interface Status Display

Gigabit Ethernet lanadmin Display

The following is a sample of a lanadmin(1M) command display. The ﬁelds are deﬁned in the section that follows.

HP-UX 10.20 lanadmin output:

Sun, Jun 21,1998 14:39:36

Network Management ID		= 5
Description		= lan3 HP 1000Base-SX Adapter HW Rev A-3814
Type (value)		= ethernet-csmacd(6)
MTU Size		= 1500
Speed		= 1000000000
Station Address		= 0x60b0c41121
Administration Status (value)		= up(1)
Operation Status (value)		= up(1)
Last Change		= 1
Inbound Octets		= 0
Inbound Unicast Packets		= 0
Inbound Non-Unicast Packets		= 0
Inbound Discards		= 0
Inbound Errors		= 0
Inbound Unknown Protocols		= 0
Outbound	Octets	= 0
Outbound	Unicast Packets	= 0
Outbound	Non-Unicast Packets	= 0
Outbound	Discards	= 0
Outbound	Errors	= 0
Outbound	Queue Length	= 0
Specific		= 655367
Ethernet-like Statistics Group
Index		= 5
Alignment Errors		= 0
FCS Errors		= 0
Single Collision Frames		= 0
Multiple	Collision Frames	= 0
Deferred	Transmissions	= 0
Late Collisions		= 0
Excessive Collisions		= 0
Internal	MAC Transmit Errors	= 0
Carrier Sense Errors		= 0
Frames Too Long		= 0
Internal	MAC Receive Errors	= 0

54	Appendix A

HP I 1000Base-T, HSC/I 1000Base-SX manual LAN Interface Status Display