HP HSC/I 1000Base-SX, I 1000Base-T manual Setting Values, Option Setting

		Configuring Gigabit Ethernet Parameters
		Using the lanadmin Tool with Gigabit Ethernet
	Card Statistics To display the card statistics, execute:
	$ lanadmin -x stats drv nmid/ppa
	See Appendix B for a sample output and explanation of the card statistics.
NOTE
	Send Buffer Coalescing To display the send buffer coalescing threshold, execute:
	$ lanadmin -x send_max_bufs nmid/ppa
	Send buffer coalescing threshold = 16
	Receive Interrupt Coalescing To display the receive interrupt coalescing ticks,
	execute:
	$ lanadmin -x recv_coal_ticks nmid/ppa
	Receive interrupt coalescing ticks = 0
	Flow Control To display the flow control setting, execute:
	$ lanadmin -x fctrl nmid/ppa
	Flow control is enabled
	Setting Values
	The command $ lanadmin -X (or -x) help nmid/ppa displays a list of valid options
	used to set values.
	Option	Setting
	help	Lists -X or -x options
	auto_on	Turns on auto-negotiation mode
	auto_off	Turns off autonegotiation mode for a 1000Base-SX
	fctrl on	Turns on receive flow control
	fctrl off	Turns off receive flow control
	10hd	Sets speed of a 1000Base-T to 10 Mbps half-duplex
	10fd	Sets speed of a 1000Base-T to 10 Mbps full-duplex
	100hd	Sets speed of a 1000Base-T to 100 Mbps half-duplex
	100fd	Sets speed of a 1000Base-T to 100 Mbps full-duplex
	send_max_bufs*	Sets send buffer coalescing threshold [1 – 128]
	recv_max_bufs*	Sets receive buffer coalescing threshold [1 – 256]
	send_coal_ticks*	Sets send interrupt coalescing ticks [0 – 10000000]

Chapter 2 17