HP Instant Capacity (iCAP) manual Required Patches for HP-UX 11i

the managers and members of groups is established using SSL certificates that are supplied by the GiCAP software.

Required Patches for HP-UX 11i v1

The following patches are required for Instant Capacity version 9.x on HP-UX 11i v1:

•PHKL_22987: S700_800 11.11 pstat() patch (Use only if your system runs MeasureWare software)

•PHKL_23154: S700_800 11.11 dflush() patch

•PHKL_25218: S700_800 11.11 PDC Call retry, PDC_SCSI_PARMS, iCOD hang fix

•PHKL_26232: S700_800 11.11 Psets Enablement patch,FSS iCOD patch

•PHKL_30197: S700_800 11.11 Psets & vPar, Reboot hangs, serial number

•PHCO_24396: S700_800 11.11 /etc/default/tz patch

•PHCO_24477: S700_800 11.11 sar (1M) patch

•PHCO_29832: S700_800 11.11 reboot(1M) patch

•PHCO_29833: S700_800 11.11 killall(1M) patch

IMPORTANT: For the most recent required patches, see the Instant Capacity Installation page on the HP Software Depot (search for “B9073BA”):

http://www.hp.com/go/softwaredepot

HP-UX 11i v2 Requirements and Dependent Products

The following software is required for Instant Capacity version 9.x on HP-UX 11i v2:

•HP-UX 11i v2

•iCOD software bundle B9073BA (version 9.x) — On the 11i v2 Applications Software media, or download the most recent version from the HP Software Depot at http://www.hp.com/ go/softwaredepot.

•The kernel configuration must include the diag2 module.

•WBEM B8465BA bundle (version A.02.05 or higher)

•nParProvider bundle (version B.23.01.06.02 or higher, available from the OE media)

•If you have a virtual partitioned environment, the Virtual Partitions (vPars) software (bundle T1335BC) must be version A.04.01 or higher. vPars is available separately and is not included with the OE.

•(GiCAP only) The CIM Server configuration property sslClientVerificationMode must be set to a value of “optional” on all GiCAP Group Managers and on all OS instances of all member systems. (The CIM Server may need to be restarted if the property was not previously set to this value.) For details, see cimconfig(1M). Note that communication between the managers and members of groups is established using SSL certificates that are supplied by the GiCAP software.

NOTE: On HP-UX 11i v2 systems, updated firmware might be required by the nPar or Virtual Partition software, as documented for these products.

Required Patches for HP-UX 11i v2

The following patches are required for Instant Capacity version 9.x on HP-UX 11i v2:

•PHKL_33752: S700_800 11.23 Itanium 2 Processor speed reporting patch required only for IA systems

•PHCO_34721: killall(1M) patch

•PHKL_35174: _CS_PARTITION_IDENT patch required for GiCAP on rx8640 and rx7640 systems

Instant Capacity Requirements 29