System contact email:

This field displays the email address for the person who

 

should receive configuration change notification and

 

exception reports for the local system. This field is set via

 

the icapmodify -c command.

From email:

This field displays the email address that will be specified

 

as the sender of all Instant Capacity initiated email

 

correspondence for the local system. This field is set via

 

the icapmodify -fcommand. If not set, email will be

 

sent from the adm user on the local system.

Asset reporting:

This field indicates if the Instant Capacity software on the

 

local system is presently configured to send email asset

 

reports to HP. This is configured using the icapnotify

 

-acommand.

Temporary capacity warning period:

This field displays the number of days constituting the

 

temporary capacity warning period for the complex. When

 

the temporary capacity balance is projected to be depleted

 

within this number of days, a warning message is sent by

 

email to the system contact and to root. The value of the

 

warning period can be set using the icapmodify -w

 

command.

Exception Status:

This field indicates if the complex is presently in an

 

exception state. A complex is usually in an exception state

 

when the number of active components of a given type

 

(cores, cells, memory) exceeds the number of available

 

usage rights for that component type. The one exception

 

is that the number of active cores is allowed to exceed the

 

number of core usage rights as long as there is a sufficient

 

positive balance of temporary capacity. A negative

 

temporary capacity balance is always an exception state.

Information displayed for a GiCAP group

The following status information is displayed when the system is a member of a GiCAP group.

Member <mname> in GiCAP group

This section heading identifies the member name

<gname>

(<mname>) and the name of the GiCAP group (<gname>)

 

that includes this system as a member.

Active Group Manager:

This field identifies the name of the active Group Manager

 

system where you can get more detailed information about

 

the group, by invoking the icapmanage command (see

 

icapmanage(1M)).

Standby Group Manager:

This field identifies the name of the standby Group

 

Manager system, if a standby has been defined for the

 

group. The standby Group Manager has the ability to take

 

control of the group if the active Group Manager should

 

become unavailable for any reason. The field is displayed

 

as “N/A” if no standby Group Manager has been defined

 

for the group.

Borrowed/Loaned core usage rights:

This field identifies the count of core usage rights that were

 

either borrowed from or loaned to the GiCAP group. This

 

value must be 0 in order to remove the member from the

 

GiCAP group.

Borrowed/Loaned cell usage rights: This field identifies the count of cell board usage rights that were either borrowed from or loaned to the GiCAP

183