HP Instant Capacity (iCAP) manual Environment Variables, Apply an iCAP codeword

only option that can be used when the complex is in this state is the -Coption, which accepts the upgrade codeword.

EXTERNAL INFLUENCES

Environment Variables

•LANG determines the locale to use for the locale categories when both LC_ALL and the corresponding environment variable (beginning with LC_) do not specify a locale. If LANG is not set or is set to the empty string, a default of “C” is used (see lang(5)).

•LC_CTYPE determines the interpretation of single- and multiple-byte characters.

•LC_TIME determines the date and time strings output.

•LC_MESSAGES determines the language in which messages are displayed.

If any internationalization variable contains an invalid setting, icapmodify behaves as if all internationalization variables are set to C (see environ(5)).

International Code Set Support

Single- and multiple-byte character code sets are supported. However, input to the command must be entered using ASCII characters only.

RETURN VALUE

The icapmodify command exits with one of these values:

0Command succeeded.

>0 Command failed; error message sent to STDERR.

FILES

/var/adm/icap.log

EXAMPLES

Instantly activate one core with "Add horsepower now" as the description and "Super User" as the user name:

icapmodify -a 1 "Add horsepower now:Super User"

Activate two cores (deferred until the next reboot) with "Add horsepower after reboot" as the description and "Super User" as the user name:

icapmodify -D -a 2 "Add horsepower after reboot:Super User"

Instantly activate one core, using temporary capacity if necessary, with "Temp use of one core" as the description and "Super User" as the user name:

icapmodify -t -a 1 "Temp use of one core:Super User"

Instantly activate or deactivate cores to specify 8 active cores (and 8 intended active cores) with "Set active cores to 8" as the description and "Super User" as the user name:

icapmodify -s 8 "Set active cores to 8:Super User"

Deactivate one core at the next reboot with "Less horsepower after reboot" as the description and "Super User" as the user name:

icapmodify -D -d 1 "Less horsepower after reboot:Super User"

Apply an iCAP codeword:

icapmodify -C 7y5ejVS.P5CuwXu.XaTyDVP.7Tx0Mvc-J783H9b.yWT5Weu.69JPu$u.vVV685a5

Set the Instant Capacity from_email_address to admin@research.corp.com:

178