HP J3177A, J3175A manual Front of the Switches, Network Ports, Switch 208/224 Description

Switch 208/224 Description

Switch 208/224 Description

Front of the Switches

Front of the Switches

			4 LEDs for	LED indicating
			expansion module	Port 1 is disabled
Power	Fault	RPS	LEDs for		LEDs for
LED	LED	LED	100 Mbit/s ports		10 Mbit/s ports

HP J3175A

Switch 208T

HP J3177A

Switch 224T

slot for	100 Mbit/s ports:
		10 Mbit/s RJ-45ports
Switch Management Module	- one fixed RJ-45
	- one

Network Ports

■8 or 24 10 Mbit/s RJ-45 Ethernet/IEEE 802.3 ports

■one fixed 100 Mbit/s RJ-45 100Base-TX port

■one 100 Mbit/s transceiver slot for installing HP 100Base-TX or 100Base- FX transceivers

All the twisted-pair ports are wired as MDI-X. Therefore, to connect end nodes or other MDI-type devices to these ports, use “straight-through” twisted-pair cable; to connect hubs, switches, or other MDI-X-type devices to these ports, use “crossover” twisted-pair cable. See appendix A, “Cables and Connectors” for descriptions of these cables.

The cabling to the transceiver port depends on the type of transceiver installed. For more information, refer to the manual that came with the transceiver.

2-2