4.Open the access door by pulling on the metal tab.

5.Locate the USB ports near the bottom of the formatter board. Insert the USB device into one of the ports.

CAUTION: To prevent static electricity from damaging the formatter board, hold the metal access door with one hand while you insert the USB device with the other hand. If you move away from the product during this procedure, be sure to touch the metal access door to discharge electricity before continuing.

6.Close the access door, and press firmly until it snaps into place.

164 Chapter 9 Manage and maintain

ENWW

Page 180
Image 180
HP Laser M602, Laser M603, Laser M601 manual Enww