HP Laser M603, Laser M602, Laser M601 manual 12Network Settings menu, Jetdirect Menu

Network Settings menu

To display: At the product control panel, press the Home button, select the Administration menu, and then select the Network Settings menu.

In the following table, asterisks (*) indicate the factory default setting.

Table 2-12Network Settings menu
First level	Values
I/O Timeout	Range: 5 – 300 sec
	Default = 15
Jetdirect Menu	See the table that follows for details.

Table 2-13	Jetdirect Menu
First level	Second level	Third level	Fourth level	Values
Information	Print Sec Page			Yes
				No*
TCP/IP	Enable			On*
				Off
	Host Name
	IPV4 Settings	Config Method		Bootp
				DHCP*
				Auto IP
				Manual
		Manual Settings	IP Address	Enter the address.
		NOTE: This menu is
		available only if you
		select the Manual option
		under the Config
		Method menu.
			Subnet Mask	Enter the address.
			Default Gateway	Enter the address.
		Default IP		Auto IP*
				Legacy
		DHCP Release		No*
				Yes

ENWW Administration menu 27