HP Laser M601, Laser M602 Administration Network Settings Jetdirect Menu, IPV6 Settings Address

Models: Laser M603 Laser M602 Laser M601

1 264
Download 264 pages 41.45 Kb
Page 83
Image 83

Manually configure IPv6 TCP/IP parameters from the control panel

Use the control-panel Administration menus to manually set an IPv6 address.

1.At the control panel, press the Home button.

2.To enable manual configuration, open each of the following menus:

a.Administration

b.Network Settings

c.Jetdirect Menu

d.TCP/IP

e.IPV6 Settings

f.Address

g.Manual Settings

h.Enable

Select the On option, and then press the OK button.

3.To configure the address, open each of the following menus:

Administration

Network Settings

Jetdirect Menu

TCP/IP

IPV6 Settings

Address

Use the numeric keypad, or press the up arrow or the down arrow to enter the address. Press the OK button.

NOTE: If you are using the arrow buttons, you must press the OK button after entering each digit.

ENWW

Connect to a network with Windows 67

Page 83
Image 83
HP Laser M601, Laser M602, Laser M603 manual Administration Network Settings Jetdirect Menu, IPV6 Settings Address