HP Laser M601, Laser M602, Laser M603 manual Jam locations, Clear jams from the output areas

Clear jams

Jam locations

If a jam message appears on the control-panel display, look for jammed paper or other print media in the locations that are indicated in the following illustration. Then follow the procedure for clearing the jam. You might need to look for paper in other locations than those that are indicated in the jam message. If the location of the jam is not obvious, look first in the top-cover area underneath the print cartridge.

When clearing jams, be very careful not to tear jammed paper. If a small piece of paper is left in the product, it could cause additional jams.

6	1
5
	2
4	3

1Top-cover and print-cartridge areas

2Optional envelope feeder

3Tray areas (Tray 1, Tray 2, and optional trays)

4Optional duplexer

5Fuser area

6Output areas (top bin; rear bin; and optional stacker, stapler/stacker, or 5-bin mailbox)

NOTE: Loose toner might remain in the product after a jam and cause temporary print-quality problems. These problems should clear up within a few pages.

Clear jams from the output areas

Use these procedures to clear jams that occur in the rear output bin or in the optional stacker, stapler/ stacker, or 5-bin mailbox.

ENWW Clear jams 175