4.Grasp both sides of the print cartridge and distribute the toner by gently rocking the print cartridge.

CAUTION: Do not touch the shutter or the surface of the roller.

5.Remove the shipping lock and the shipping tape from the new print cartridge. Discard the lock and tape according to local regulations.

6.Align the print cartridge with the tracks inside the product, insert the print cartridge until it is firmly seated, and then close the top cover.

After a short time, the control panel should display the Ready message.

7.Installation is complete. Place the used print cartridge in the box in which the new cartridge arrived. See the enclosed recycling guide for recycling instructions.

8.If you are using a non-HP print cartridge, check the product control panel for further instructions.

98 Chapter 7 Print cartridges

ENWW

Page 114
Image 114
HP Laser M602, Laser M603, Laser M601 manual Enww