![](/images/new-backgrounds/1152548/152548155x1.webp)
Wireless Configuration (wireless models only)
Use the Wireless Configuration page to turn off/on the wireless capabilities for the product. Figure
Wireless Direct Setup (wireless models only)
Use the Wireless Direct Setup page to enable devices within wireless range to connect to the product and print.
Figure 2-38 HP Device Toolbox, Networking tab — Wireless Direct Setup page
Network Identification
Use the Network Identification pane to configure the host name and domain name(s) used to identify the product on the network.
The values for host name and domain names are retrieved from the firmware, and displayed on this pane. The networking firmware determines what host name and domain name(s) to use.
The information under Available Host name / Domain names is for information only and cannot be modified.
The text entries are disabled under certain circumstances. The following table defines when the entities are disabled:
70 | Chapter 2 Windows software description and installation | ENWW |