Default print driver settings: The default print driver settings determine the settings used in all print jobs, unless settings are changed in the Page Setup, Print, or Printer Properties dialog boxes.

Product control-panel settings: Settings changed at the product control panel have a lower priority than changes made anywhere else.

Install the Mac printing-system software

On a Mac computer, the printing-system software installation procedures are the same for a network administrator, a network client, or a single user. Install the printing-system software on any computer that has access rights to the product. The computer user must also have administrative rights on the computer to install the printing-system software.

General installation for Mac operating systems

Detailed Mac installation

Setup instructions

General installation for Mac operating systems

1.If you are connecting the product to a network, connect the network cable to the network port. If you are connecting the product to a computer by using the USB cable, connect the USB cable.

2.Insert the Mac printing-system software CD into the CD-ROM drive.

NOTE: If the HP LaserJet installer browser screen does not open automatically when the CD is inserted into the CD-ROM drive, double-click the product CD image on the desktop to open the installer browser screen.

3.In the HP LaserJet installer browser screen, double-click the product .dmg icon, then double-click the .pkg icon. This begins the printing-system installation.

NOTE: In the HP LaserJet installer browser screen, double-click the Documentation icon to gain access to the manuals. Select a language folder and locate the available guides which are in .PDF format. The user guide is a .PDF file that is named CF040_use_xxww.pdf, where “xx” is a language abbreviation

4.The Introduction screen appears. Click Continue and then follow the onscreen instructions to complete the printing-system software installation.

NOTE: When the printing-system software is installing, be patient. The installer must perform an initial search of the computer, which can take up to 1 minute. During this time, the installer might appear to be stalled.

5.When the printing-system software installation is complete, click OK.

6.Continue with the steps for setting up a product.

ENWW

Install the Mac printing-system software 121

Page 129
Image 129
HP M401DNE Laser CF399A#BGJ manual Install the Mac printing-system software, General installation for Mac operating systems