Using the Analog Video Cable

(Select models only)

D

E

Analog Video

n

Refer to the Start Here guide for more information about the various display connection options.

If you are using the analog video cable to connect your PC display to your PC, you need to connect the cable and then set the Output switch on the cable to match the correct video output. If you are using component cables, you must also set the resolution of your TV or other video display on the analog video cable.

To use the analog video cable:

1 Make sure the PC power is disconnected.

2 Connect the analog video cable to the Analog Video Output connector on the back of

the PC.

3 If you are using a composite or S-video cable to connect your display to the PC, set the switch labeled Output near the arrows toward the S-video and composite (A) connectors. See (D) above. Go to step 7.

A

4 If you are using Component video cables to connect your display to the PC, set the switch labeled Output near the arrows toward the three (Y, Pb, and Pr) component connectors (B). See (E) above. Go to step 5.

B

5 Check the documentation for your display to find out the optimal resolution.

Connecting the Television Signal 13